View PBSS302NZ_1293743.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
Rev. 01 -- 8 September 2006 Product data sheet
1. Product profile
1.1 General description
NPN low VCEsat Breakthrough In Small Signal (BISS) transistor in a SOT223 (SC-73) small Surface-Mounted Device (SMD) plastic package. PNP complement: PBSS302PZ.
1.2 Features
I I I I I Low collector-emitter saturation voltage VCEsat High collector current capability IC and ICM High collector current gain (hFE) at high IC High efficiency due to less heat generation Smaller required Printed-Circuit Board (PCB) area than for conventional transistors
1.3 Applications
I I I I I DC-to-DC conversion MOSFET gate driving Motor control Charging circuits Power switches (e.g. motors, fans)
1.4 Quick reference data
Table 1. VCEO IC ICM RCEsat
[1]
Quick reference data Conditions open base single pulse; tp 1 ms IC = 4 A; IB = 200 mA
[1]
Symbol Parameter collector-emitter voltage collector current peak collector current collector-emitter saturation resistance
Min -
Typ 30
Max 20 5.8 11.6 43
Unit V A A m
Pulse test: tp 300 s; 0.02.
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
2. Pinning information
Table 2. Pin 1 2 3 4 Pinning Description base collector emitter collector
1 2 3 3
sym016
Simplified outline
4
Symbol
2, 4 1
3. Ordering information
Table 3. Ordering information Package Name PBSS302NZ SC-73 Description Version plastic surface-mounted package with increased heat SOT223 sink; 4 leads Type number
4. Marking
Table 4. Marking codes Marking code S302NZ Type number PBSS302NZ
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
2 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
5. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCBO VCEO VEBO IC ICM Ptot Parameter collector-base voltage collector-emitter voltage emitter-base voltage collector current peak collector current total power dissipation single pulse; tp 1 ms Tamb 25 C
[1] [2] [3]
Conditions open emitter open base open collector
Min -65 -65
Max 20 20 5 5.8 11.6 0.7 1.7 2 150 +150 +150
Unit V V V A A W W W C C C
Tj Tamb Tstg
[1] [2] [3]
junction temperature ambient temperature storage temperature
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2. Device mounted on a ceramic PCB, Al2O3, standard footprint.
2.5 Ptot (W) 2.0
(1) (2)
006aaa560
1.5
1.0
(3)
0.5
0 -75
-25
25
75
125 175 Tamb (C)
(1) Ceramic PCB, Al2O3, standard footprint (2) FR4 PCB, mounting pad for collector 6 cm2 (3) FR4 PCB, standard footprint
Fig 1. Power derating curves
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
3 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
6. Thermal characteristics
Table 6. Symbol Rth(j-a) Thermal characteristics Parameter thermal resistance from junction to ambient Conditions in free air
[1] [2] [3]
Min -
Typ -
Max 179 74 63 15
Unit K/W K/W K/W K/W
Rth(j-sp)
[1] [2] [3]
thermal resistance from junction to solder point
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for collector 6 cm2. Device mounted on a ceramic PCB, Al2O3, standard footprint.
103 Zth(j-a) (K/W) 102
006aaa561
=1 0.75 0.50 0.33 0.20 0.10 0.05 0.02 0.01
10
1
0
10-1 10-5
10-4
10-3
10-2
10-1
1
10
102 tp (s)
103
FR4 PCB, standard footprint
Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
4 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
102 Zth(j-a) (K/W) 10
006aaa562
=1 0.75 0.50 0.20 0.10 0.05 0.02 0.01 0.33
1 0
10-1 10-5
10-4
10-3
10-2
10-1
1
10
102 tp (s)
103
FR4 PCB, mounting pad for collector 6 cm2
Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
102 =1 Zth(j-a) (K/W) 10 0.10 0.05 0.02 1 0.01 0 0.75 0.50 0.20 0.33
006aaa563
10-1 10-5
10-4
10-3
10-2
10-1
1
10
102 tp (s)
103
Ceramic PCB, Al2O3, standard footprint
Fig 4. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
5 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
7. Characteristics
Table 7. Characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter ICBO Conditions Min [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1] [1]
Typ 570 550 520 450 350 20 35 50 70 120 115 155 170 30 38 0.82 0.92 0.75 15 40 55 270 85 355 140 95
Max 100 50 100 25 50 70 100 170 165 240 250 43 60 0.9 1.05 0.85 150
Unit nA A nA
collector-base cut-off VCB = 20 V; IE = 0 A current VCB = 20 V; IE = 0 A; Tj = 150 C emitter-base cut-off current DC current gain VEB = 5 V; IC = 0 A VCE = 2 V; IC = 0.5 A VCE = 2 V; IC = 1 A VCE = 2 V; IC = 2 A VCE = 2 V; IC = 4 A VCE = 2 V; IC = 7 A
IEBO hFE
300 300 250 200 200 -
VCEsat
collector-emitter saturation voltage
IC = 0.5 A; IB = 50 mA IC = 1 A; IB = 50 mA IC = 1 A; IB = 10 mA IC = 2 A; IB = 40 mA IC = 4 A; IB = 200 mA IC = 4 A; IB = 400 mA IC = 4 A; IB = 40 mA IC = 5.8 A; IB = 290 mA
mV mV mV mV mV mV mV mV m m V V V ns ns ns ns ns ns MHz pF
RCEsat VBEsat VBEon td tr ton ts tf toff fT Cc
[1]
collector-emitter IC = 4 A; IB = 200 mA saturation resistance I = 4 A; I = 40 mA C B base-emitter saturation voltage IC = 1 A; IB = 100 mA IC = 4 A; IB = 400 mA
base-emitter turn-on VCE = 2 V; IC = 2 A voltage delay time rise time turn-on time storage time fall time turn-off time transition frequency VCE = 10 V; IC = 100 mA; f = 100 MHz VCC = 12.5 V; IC = 3 A; IBon = 0.15 A; IBoff = -0.15 A
-
collector capacitance VCB = 10 V; IE = ie = 0 A; f = 1 MHz
Pulse test: tp 300 s; 0.02.
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
6 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
1000 hFE
(1)
006aaa572
14 IC (A) 12 10
006aaa578
IB (mA) = 50 45 40 35 30 25 20 15
800
600
(2)
8 6
(3)
400
10 4 5 2
200
0 10-1
1
10
102
103 104 IC (mA)
0 0 1 2 3 4 VCE (V) 5
VCE = 2 V (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
Tamb = 25 C
Fig 5. DC current gain as a function of collector current; typical values
1.2 VBE (V) 0.8
(1)
Fig 6. Collector current as a function of collector-emitter voltage; typical values
1.2 VBEsat (V) 0.8
(1)
006aaa573
006aaa576
(2) (2)
0.4
(3)
0.4
(3)
0 10-1
1
10
102
103 104 IC (mA)
0 10-1
1
10
102
103 104 IC (mA)
VCE = 2 V (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C
IC/IB = 20 (1) Tamb = -55 C (2) Tamb = 25 C (3) Tamb = 100 C
Fig 7. Base-emitter voltage as a function of collector current; typical values
Fig 8. Base-emitter saturation voltage as a function of collector current; typical values
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
7 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
1 VCEsat (V) 10-1
(1) (2) (3)
006aaa574
1 VCEsat (V) 10-1
006aaa575
(1)
10-2
10-2
(2)
(3)
10-3 10-1
1
10
102
103 104 IC (mA)
10-3 10-1
1
10
102
103 104 IC (mA)
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
Tamb = 25 C (1) IC/IB = 100 (2) IC/IB = 50 (3) IC/IB = 10
Fig 9. Collector-emitter saturation voltage as a function of collector current; typical values
103 RCEsat () 102
006aaa577
Fig 10. Collector-emitter saturation voltage as a function of collector current; typical values
103 RCEsat () 102
(1) (2)
006aaa579
10
10
(3)
1
(1) (2) (3)
1
10-1
10-1
10-2 10-1
1
10
102
103 104 IC (mA)
10-2 10-1
1
10
102
103 104 IC (mA)
IC/IB = 20 (1) Tamb = 100 C (2) Tamb = 25 C (3) Tamb = -55 C
Tamb = 25 C (1) IC/IB = 100 (2) IC/IB = 50 (3) IC/IB = 10
Fig 11. Collector-emitter saturation resistance as a function of collector current; typical values
Fig 12. Collector-emitter saturation resistance as a function of collector current; typical values
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
8 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
8. Test information
IB 90 % input pulse (idealized waveform) IBon (100 %)
10 %
IBoff
IC 90 %
output pulse (idealized waveform)
IC (100 %)
10 % t td ton tr ts toff tf
006aaa003
Fig 13. BISS transistor switching time definition
VBB VCC
RB (probe) oscilloscope 450 VI R1 R2
RC Vo (probe) 450 DUT oscilloscope
mlb826
VCC = 12.5 V; IC = 3 A; IBon = 0.15 A; IBoff = -0.15 A
Fig 14. Test circuit for switching times
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
9 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
9. Package outline
6.7 6.3 3.1 2.9 4 1.1 0.7 7.3 6.7 3.7 3.3
1.8 1.5
1 2.3 4.6 Dimensions in mm
2
3 0.8 0.6 0.32 0.22 04-11-10
Fig 15. Package outline SOT223 (SC-73)
10. Packing information
Table 8. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number PBSS302NZ
[1]
Package SOT223
Description 8 mm pitch, 12 mm tape and reel
Packing quantity 1000 -115 4000 -135
For further information and the availability of packing methods, see Section 14.
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
10 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
11. Soldering
7.00 3.85 3.60 3.50 0.30 1.20 (4 x) 4
7.40
3.90 4.80 7.65
1
2
3
1.20 (3 x) 1.30 (3 x) 5.90 6.15 solder lands occupied area solder resist
solder paste
Dimensions in mm
sot223_fr
Fig 16. Reflow soldering footprint SOT223 (SC-73)
8.90 6.70
4
4.30 8.10 8.70
1
2
3
1.90 (2x)
1.10 7.30 transport direction during soldering
solder lands
occupied area
solder resist
Dimensions in mm
sot223_fw
Fig 17. Wave soldering footprint SOT223 (SC-73)
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
11 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
12. Revision history
Table 9. Revision history Release date 20060908 Data sheet status Product data sheet Change notice Supersedes Document ID PBSS302NZ_1
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
12 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
13. Legal information
13.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.semiconductors.philips.com.
13.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Philips Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Philips Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
malfunction of a Philips Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Philips Semiconductors accepts no liability for inclusion and/or use of Philips Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- Philips Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.semiconductors.philips.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Philips Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
13.3 Disclaimers
General -- Information in this document is believed to be accurate and reliable. However, Philips Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- Philips Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- Philips Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
14. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
PBSS302NZ_1
(c) Koninklijke Philips Electronics N.V. 2006. All rights reserved.
Product data sheet
Rev. 01 -- 8 September 2006
13 of 14
Philips Semiconductors
PBSS302NZ
20 V, 5.8 A NPN low VCEsat (BISS) transistor
15. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 13.1 13.2 13.3 13.4 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Packing information. . . . . . . . . . . . . . . . . . . . . 10 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contact information. . . . . . . . . . . . . . . . . . . . . 13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) Koninklijke Philips Electronics N.V. 2006.
All rights reserved.
For more information, please visit: http://www.semiconductors.philips.com. For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com. Date of release: 8 September 2006 Document identifier: PBSS302NZ_1

▲Up To Search▲

Price & Availability of PBSS302NZ

	To Download PBSS302NZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .